remove old cnc draft

content/cnc_isolation_routing_p1.md

@@ -1,35 +0,0 @@
-Title: CNC Isolation Routing: part 1
-Date: 2023-09-20
-Category: Posts
-Tags: Electronics, Hardware
-Status: draft
-
-Outline:
-
-    - Hardware Notes:
-        - worthless side shields on 3018ProVer
-        - limit switches seem mandatory for candle
-    - Software Chain Notes:
-        - talk about final pcb2gcode settings that work
-        - grbl:
-            - gcode reference: https://linuxcnc.org/docs/html/gcode/g-code.html
-            - quick reference: https://linuxcnc.org/docs/html/gcode.html
-            - https://github.com/gnea/grbl/wiki
-        - candle2:
-            - losing work coordinates
-            - G28 and G28.1 grbl commands
-                - turn off command autocomplete when using G28.1 :(
-            - set coordinate system to work size
-            - z-height probing w/ interpolation
-                - don't forget to apply the map :/
-                - don't forget to save the map, gets lost when switching jobs
-            - adjust cutting depth if needed using the coord system z-offset
-            - don't use pendant while controlling with PC!
-    - Physical Setup Notes:
-        - double-sided tape
-        - spoilboard
-        - apply soldermask before drilling to avoid painting leaking through holes!
-        - using multiple sheet to spread solder-mask
-        - clean surface!
-        - uv-curing ~5-10min depending on lighting and thickness
-